Financial inclusion and low-carbon architectural design strategies: solutions for architectural climate conditions and architectural temperature on new buildings.

The objective of this research is to explore the potential of financial inclusion and low-carbon architectural design strategies as solutions to improve the thermal comfort and energy efficiency of new buildings in different architectural climate conditions. The manufacture sector, which accounts for about 40% of all yearly greenhouse gas releases, has been stimulating with trying to reduce the amount of energy it consumes and the detrimental effects it has on the climate, in accordance with the standards outlined in the 2016 Paris Agreement. In this study, panel data analysis is used to examine the connection between green property financing and carbon dioxide emissions from the building sector in one hundred and five developed and developing countries. Although this analysis finds a negative correlation among the development of environmentally friendly real estate financing and firms' worldwide carbon dioxide emissions, it finds that this correlation is most robust in developing nations. A number of these countries are experiencing an unregulated and rapid population explosion, which has boosted their demand for oil, making this discovery essential for them. The difficulty in securing green funding during this crisis is slowing and even reversing gains made in past years, making it all the more important to keep this momentum going during the COVID-19 outbreak. It's critical to keep the momentum going by doing something.

Avoidable heat risk under scenarios of carbon neutrality by mid-century.

To prevent anthropogenic warming of the climate system above dangerous thresholds, governments are required by the Paris Agreement to peak global anthropogenic CO2 emissions and to reach a net zero CO2 emissions level (also known as carbon neutrality). Growing concerns are being expressed about the increasing heat stress caused by the interaction of changes in temperature and humidity in the context of global warming. Although much effort has been made to examine future changes in heat stress and associated risks, gaps remain in understanding the quantitative benefits of heat-risk avoidance from carbon-neutral policies, limited by the traditional climate projections from the Coupled Model Intercomparison Project Phase 6 (CMIP6). Here we quantify the avoided heat risk during 2040-2049 under two scenarios of global carbon neutrality by 2060 and 2050, i.e., moderate green (MODGREEN) and strong green (STRGREEN) recovery scenarios, relative to the baseline scenario (FOSSIL), based on multi-model large ensemble climate projections from a new climate model intercomparison project (CovidMIP) that endorsed by CMIP6. We show that global population exposure to extreme heat stress increases by approximately four times its current level during 2040-2049 under the FOSSIL scenario, whereas the heat exposure could be reduced by as much as 12 % and 23 % under the MODGREEN and STRGREEN scenarios, respectively. Moreover, global mean heat-related mortality risk is mitigated by 14 % (24 %) under the MODGREEN (STRGREEN) scenario during 2040-2049 relative to the FOSSIL scenario. Additionally, the aggravating heat risk could be mitigated by around a tenth by achieving carbon neutrality 10 years earlier (2050 versus 2060). In terms of spatial pattern, this heat-risk avoidance from low-carbon policies is typically greater in low-income countries. Our findings assist governments in advancing early climate change mitigation policy-making.

Variations in land surface temperatures in small-scale urban areas in Vietnam during Covid-19 restrictions: Case studies from Da Nang, Hue and Vinh City.

Land surface temperature (LST) is an important variable in urban microclimate research. At the end of 2019, the emergence of Covid-19 pandemic has changed the world in a manner that forced many countries to impose restrictions in human activities. As a measure to prevent the expansion of Covid-19 infections, most of the major cities have entered a prolonged lockdown period and reduction in human activities between the early 2020 and the late 2021. These restrictions were strict in most of the cities in Southeast Asia, particularly in Vietnam. The present study investigated the variations in LST and NDVI observed in three rapidly growing urban areas, namely Da Nang, Hue and Vinh, in Vietnam using Landsat-8 imagery acquired between 2017 and 2022. There has been a slight reduction in LST in the study sites, particularly in Da Nang City, during the lockdown period but not as high as observed in recently conducted studies from big metropolitan cities, including in Vietnam. It is also observed that LST estimated from built-up areas and other impervious surfaces remained relatively stable during the study period which is similar to the results from recent studies.

Self-Destructive Structural Color Liquids for Time-Temperature Indicating.

Vaccines are undoubtedly a powerful weapon in our fight against global pandemics, as demonstrated in the recent COVID-19 case, yet they often face significant challenges in reliable cold chain transport. Despite extensive efforts to monitor their time-temperature history, current time-temperature indicators (TTIs) suffer from limited reliability and stability, such as difficulty in avoiding human intervention, inapplicable to subzero temperatures, narrow tracking temperature ranges, or susceptibility to photobleaching. Herein, we develop a class of structural color materials that harnesses dual merits of fluidic nature and structural color, enabling thermal-triggered visible color destruction based on triggering agent-diffusion-induced irreversible disassembly of liquid colloidal photonic crystals for indicating the time-temperature history of the cold chain transport. These self-destructive structural color liquids (SCLs) exhibit inherent irreversibility, superior sensitivity, tunable self-destructive time (minutes to days), and a wide tracking temperature range (-70 to +37 °C). Such self-destructive SCLs can be conveniently packaged into flexible TTIs for monitoring the storage and exposure status of diverse vaccines via naked-eye inspection or mobile phone scanning. By overcoming the shortcomings inherent in conventional TTIs and responsive photonic crystals, these self-destructive SCLs can increase their compatibility with cold chain transport and hold promise for the development and application of the next-generation intelligent TTIs and photonic crystals.

Mortality in Catalonia during the summer of 2022 and its relation with high temperatures and COVID-19 cases.

Purpose: To analyse the association between the mortality during the summer 2022 and either high temperatures or the COVID-19 wave with data from the Catalan Health Care System (7.8 million people). Methods: We performed a retrospective study using publicly available data of meteorological variables, influenza-like illness (ILI) cases (including COVID-19) and deaths. The study comprises the summer months of the years 2021 and 2022. To compare the curves of mortality, ILI and temperature we calculated the z-score of each series. We assessed the observed lag between curves using the cross-correlation function. Finally, we calculated the correlation between the z-scores using the Pearson correlation coefficient (R2). Results: During the study period, 33,967 deaths were reported in Catalonia (16,416 in the summer of 2021 and 17,551 in the summer of 2022). In 2022, the observed lag and the correlation between the z-scores of temperature and all-cause deaths was 3 days and R2 = 0.86, while between ILI and all-cause deaths was 22 days and R2 = 0.21. This high correlation between temperature and deaths increased up to 0.91 when we excluded those deaths reported as COVID-19 deaths, while the correlation between ILI and non-COVID-19 deaths decreased to -0.19. No correlation was observed between non-COVID deaths and temperature or ILI cases in 2021. Conclusion: Our study suggests that the main cause of the increase in deaths during summer 2022 in Catalonia was the high temperatures and its duration. The contribution of the COVID-19 seems to be limited.

Changes in air pollution, land surface temperature, and urban heat islands during the COVID-19 lockdown in three Chinese urban agglomerations.

COVID-19 has notably impacted the world economy and human activities. However, the strict urban lockdown policies implemented in various countries appear to have positively affected pollution and the thermal environment. In this study, Moderate Resolution Imaging Spectroradiometer (MODIS) land surface temperature (LST) and aerosol optical depth (AOD) data were selected, combined with Sentinel-5P images and meteorological elements, to analyze the changes and associations among air pollution, LST, and urban heat islands (UHIs) in three urban agglomerations in mainland China during the COVID-19 lockdown. The results showed that during the COVID-19 lockdown period (February 2020), the levels of the AOD and atmospheric pollutants (fine particles (PM2.5), NO2, and CO) significantly decreased. Among them, PM2.5 and NO2 decreased the most in all urban agglomerations, by >14 %. Notably, the continued improvement in air pollution attributed to China's strict control policies could lead to overestimation of the enhanced air quality during the lockdown. The surface temperature in all three urban agglomerations increased by >1 °C during the lockdown, which was mainly due to climate factors, but we also showed that the lockdown constrained positive LST anomalies. The decrease in the nighttime urban heat island intensity (UHIInight) in the three urban agglomerations was greater than that in the daytime quantity by >25 %. The reduction in surface UHIs at night was mainly due to the reduced human activities and air pollutant emissions. Although strict restrictions on human activities positively affected air pollution and UHIs, these changes were quickly reverted when lockdown policies were relaxed. Moreover, small-scale lockdowns contributed little to environmental improvement. Our results have implications for assessing the environmental benefits of city-scale lockdowns.

The impact of meteorological factors on the spread of COVID-19.

Background: Clinical studies suggest that warmer climates slow the spread of viral infections. In addition, exposure to cold weakens human immunity. Aim: This study describes the relationship between meteorological indicators, the number of cases, and mortality in patients with confirmed coronavirus disease 2019 (COVID-19). Patients and Methods: This was a retrospective observational study. Adult patients who presented to the emergency department with confirmed COVID-19 were included in the study. Meteorological data [mean temperature, minimum (min) temperature, maximum (max) temperature, relative humidity, and wind speed] for the city of Istanbul were collected from the Istanbul Meteorology 1st Regional Directorate. Results: The study population consisted of 169,058 patients. The highest number of patients were admitted in December (n = 21,610) and the highest number of deaths (n = 46) occurred in November. In a correlation analysis, a statistically significant, negative correlation was found between the number of COVID-19 patients and mean temperature (rho = -0.734, P < 0.001), max temperature (rho = -0.696, P < 0.001) or min temperature (rho = -0.748, P < 0.001). Besides, the total number of patients correlated significantly and positively with the mean relative humidity (rho = 0.399 and P = 0.012). The correlation analysis also showed a significant negative relationship between the mean, maximum, and min temperatures and the number of deaths and mortality. Conclusion: Our results indicate an increased number of COVID-19 cases during the 39-week study period when the mean, max, and min temperatures were consistently low and the mean relative humidity was consistently high.

Macro-analysis of climatic factors for COVID-19 pandemic based on Köppen-Geiger climate classification.

This study integrated dynamic models and statistical methods to design a novel macroanalysis approach to judge the climate impacts. First, the incidence difference across Köppen-Geiger climate regions was used to determine the four risk areas. Then, the effective influence of climate factors was proved according to the non-climate factors' non-difference among the risk areas, multi-source non-major component data assisting the proof. It is found that cold steppe arid climates and wet temperate climates are more likely to transmit SARS-CoV-2 among human beings. Although the results verified that the global optimum temperature was around 10 °C, and the average humidity was 71%, there was evident heterogeneity among different climate risk areas. The first-grade and fourth-grade risk regions in the Northern Hemisphere and fourth-grade risk regions in the Southern Hemisphere are more sensitive to temperature. However, the third-grade risk region in the Southern Hemisphere is more sensitive to relative humidity. The Southern Hemisphere's third-grade and fourth-grade risk regions are more sensitive to precipitation.

Field investigation of the heat stress in outdoor of healthcare workers wearing personal protective equipment in South China.

Since the advent of coronavirus disease 2019 (COVID-19), healthcare workers (HCWs) wearing personal protective equipment (PPE) has become a common phenomenon. COVID-19 outbreaks overlap with heat waves, and healthcare workers must unfortunately wear PPE during hot weather and experience excessive heat stress. Healthcare workers are at risk of developing heat-related health problems during hot periods in South China. The investigation of thermal response to heat stress among HCWs when they do not wear PPE and when they finish work wearing PPE, and the impact of PPE use on HCWs' physical health were conducted. The field survey were conducted in Guangzhou, including 11 districts. In this survey, HCWs were invited to answer a questionnaire about their heat perception in the thermal environment around them. Most HCWs experienced discomfort in their back, head, face, etc., and nearly 80% of HCWs experienced "profuse sweating." Up to 96.81% of HCWs felt "hot" or "very hot." The air temperature had a significant impact on thermal comfort. Healthcare workers' whole thermal sensation and local thermal sensation were increased significantly by wearing PPE and their thermal sensation vote (TSV) tended towards "very hot." The adaptive ability of the healthcare workers would decreased while wearing PPE. In addition, the accept range of the air temperature (T a) were determined in this investigation. Graphical Abstract.

Stability of SARS-CoV-2 on inanimate surfaces: A review.

The stability of SARS-CoV-2 for varying periods on a wide range of inanimate surfaces has raised concerns about surface transmission; however, there is still no evidence to confirm this route. In the present review, three variables affecting virus stability, namely temperature, relative humidity (RH), and initial virus titer, were considered from different experimental studies. The stability of SARS-CoV-2 on the surfaces of six different contact materials, namely plastic, metal, glass, protective equipment, paper, and fabric, and the factors affecting half-life period was systematically reviewed. The results showed that the half-life of SARS-CoV-2 on different contact materials was generally 2-10 h, up to 5 d, and as short as 30 min at 22 °C, whereas the half-life of SARS-CoV-2 on non-porous surfaces was generally 5-9 h d, up to 3 d, and as short as 4 min at 22 â„ƒ. The half-life on porous surfaces was generally 1-5 h, up to 2 d, and as short as 13 min at 22 °C. Therefore, the half-life period of SARS-CoV-2 on non-porous surfaces is longer than that on porous surfaces, and thehalf-life of the virus decreases with increasing temperature, whereas RH produces a stable negative inhibitory effect only in a specific humidity range. Various disinfection precautions can be implemented in daily life depending on the stability of SARS-CoV-2 on different surfaces to interrupt virus transmission, prevent COVID-19 infections, and avoid over-disinfection. Owing to the more stringent control of conditions in laboratory studies and the lack of evidence of transmission through surfaces in the real world, it is difficult to provide strong evidence for the efficiency of transmission of the contaminant from the surface to the human body. Therefore, we suggest that future research should focus on exploring the systematic study of the entire transmission process of the virus, which will provide a theoretical basis for optimizing global outbreak prevention and control measures.

Association between meteorological factors and COVID-19 transmission in low- and middle-income countries: A time-stratified case-crossover study.

BACKGROUND: Evidence is limited regarding the association between meteorological factors and COVID-19 transmission in low- and middle-income countries (LMICs). OBJECTIVE: To investigate the independent and interactive effects of temperature, relative humidity (RH), and ultraviolet (UV) radiation on the spread of COVID-19 in LMICs. METHODS: We collected daily data on COVID-19 confirmed cases, meteorological factors and non-pharmaceutical interventions (NPIs) in 2143 city- and district-level sites from 6 LMICs during 2020. We applied a time-stratified case-crossover design with distributed lag nonlinear model to evaluate the independent and interactive effects of meteorological factors on COVID-19 transmission after controlling NPIs. We generated an overall estimate through pooling site-specific relative risks (RR) using a multivariate meta-regression model. RESULTS: There was a positive, non-linear, association between temperature and COVID-19 confirmed cases in all study sites, while RH and UV showed negative non-linear associations. RR of the 90th percentile temperature (28.1 °C) was 1.14 [95% confidence interval (CI): 1.02, 1.28] compared with the 50th percentile temperature (24.4 °C). RR of the10th percentile UV was 1.41 (95% CI: 1.29, 1.54). High temperature and high RH were associated with increased risks in temperate climate but decreased risks in tropical climate, while UV exhibited a consistent, negative association across climate zones. Temperature, RH, and UV interacted to affect COVID-19 transmission. Temperature and RH also showed higher risks in low NPIs sites. CONCLUSION: Temperature, RH, and UV appeared to independently and interactively affect the transmission of COVID-19 in LMICs but such associations varied with climate zones. Our results suggest that more attention should be paid to meteorological variation when the transmission of COVID-19 is still rampant in LMICs.

High temperature, COVID-19, and mortality excess in the 2022 summer: a cohort study on data from Italian surveillances.

We aimed to assess whether the effect of high temperature on mortality differed in COVID-19 survivors and naive. We used data from the summer mortality and COVID-19 surveillances. We found 3.8 % excess risk in 2022 summer, compared to 2015-2019, while 20 % in the last fortnight of July, the period with the highest temperature. The increase in mortality rates during the second fortnight of July was higher among naïve compared to COVID-19 survivors. The time series analysis confirmed the association between temperatures and mortality in naïve people, showing an 8 % excess (95%CI 2 to 13) for a one-degree increase of Thom Discomfort Index while in COVID-19 survivors the effect was almost null with -1 % (95%CI -9 to 9). Our results suggest that the high fatality rate of COVID-19 in fragile people has decreased the proportion of susceptible people who can be affected by the extremely high temperature.

Temporal relation between human mobility, climate, and COVID-19 disease.

Using the example of the city of São Paulo (Brazil), in this paper, we analyze the temporal relation between human mobility and meteorological variables with the number of infected individuals by the COVID-19 disease. For the temporal relation, we use the significant values of distance correlation t0(DC), which is a recently proposed quantity capable of detecting nonlinear correlations between time series. The analyzed period was from February 26, 2020 to June 28, 2020. Fewer movements in recreation and transit stations and the increase in the maximal temperature have strong correlations with the number of newly infected cases occurring 17 days after. Furthermore, more significant changes in grocery and pharmacy, parks, and recreation and sudden changes in the maximal pressure occurring 10 and 11 days before the disease begins are also correlated with it. Scanning the whole period of the data, not only the early stage of the disease, we observe that changes in human mobility also primarily affect the disease for 0-19 days after. In other words, our results demonstrate the crucial role of the municipal decree declaring an emergency in the city to influence the number of infected individuals.

Water bath is more efficient than hot air oven at thermal inactivation of coronavirus.

BACKGROUND: Thermal inactivation is a conventional and effective method of eliminating the infectivity of pathogens from specimens in clinical and biological laboratories, and reducing the risk of occupational exposure and environmental contamination. During the COVID-19 pandemic, specimens from patients and potentially infected individuals were heat treated and processed under BSL-2 conditions in a safe, cost-effective, and timely manner. The temperature and duration of heat treatment are optimized and standardized in the protocol according to the susceptibility of the pathogen and the impact on the integrity of the specimens, but the heating device is often undefined. Devices and medium transferring the thermal energy vary in heating rate, specific heat capacity, and conductivity, resulting in variations in efficiency and inactivation outcome that may compromise biosafety and downstream biological assays. METHODS: We evaluated the water bath and hot air oven in terms of pathogen inactivation efficiency, which are the most commonly used inactivation devices in hospitals and biological laboratories. By evaluating the temperature equilibrium and viral titer elimination under various conditions, we studied the devices and their inactivation outcomes under identical treatment protocol, and to analyzed the factors, such as energy conductivity, specific heat capacity, and heating rate, underlying the inactivation efficiencies. RESULTS: We compared thermal inactivation of coronavirus using different devices, and have found that the water bath was more efficient at reducing infectivity, with higher heat transfer and thermal equilibration than a forced hot air oven. In addition to the efficiency, the water bath showed relative consistency in temperature equilibration of samples of different volumes, reduced the need for prolonged heating, and eliminated the risk of pathogen spread by forced airflow. CONCLUSIONS: Our data support the proposal to define the heating device in the thermal inactivation protocol and in the specimen management policy.

Effect of storage temperatures simulating transport conditions of nasopharyngeal swabs on the results of a chemiluminescence immunoassay (CLIA) to detect severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antigen.

PURPOSE: Chemiluminescence Immunoassay (CLIA) is high throughput, rapid diagnostic test which has recently come up for the detection of SARS-CoV-2 antigen. The present study evaluated performance of CLIA antigen test in nasopharyngeal swab samples stored at different temperatures for 7 days to simulate the transport conditions and transit time across the country from remote peripheral laboratories to central facilities. MATERIALS AND METHODS: Limit of detection (LOD), sensitivity and specificity of VITROS® SARS-CoV-2 antigen assay was determined using Real-time reverse transcriptase PCR (rRT-PCR) confirmed SARS-CoV-2 positive and negative samples. To detect the effect of storage temperatures on VITROS ®SARS-CoV-2 antigen results, samples were stored at 4 â€‹°C, 25 â€‹°C & 37 â€‹°C for 7 days followed by detection of SARS-CoV-2 nucleocapsid antigen and compared with N-gene rRT-PCR. RESULTS: The VITROS® SARS-CoV-2 antigen test was found to have a sensitivity and specificity of 78.9% and 100% respectively with high sensitivity of 88.1% for samples with Ct â€‹< â€‹30. The LOD of VITROS assay was equivalent to 3800 copies of RNA per reactions as compared to 72 copies per reaction for rRT-PCR. We observed that more than 80% of samples with <30 Ct values could be detected by VITROS SARS-CoV-2 antigen assay at day 7 even when stored at 37 â€‹°C. For samples with Ct values between 26 and 30, on day 7 the positivity rate of N-antigen at 4 â€‹°C was 90.9% and 37 â€‹°C was 63.6%. CONCLUSIONS: CLIA testing can be carried out for the detection of SARS-CoV-2 N-protein in NP-swab samples transported in cold chain even with 7 days transit time, particularly for Ct â€‹< â€‹30 samples which represents cases with higher transmissibility. As drop in positivity for VITROS assay was lower as compared to rRT-PCR on day 7 in cold chain-maintained samples, the assay can be useful to screen samples received from remote peripheral areas before performing rRT-PCR.

Numerical simulation of social distancing of preventing airborne transmission in open space with lateral wind direction, taking into account temperature of human body and floor surface.

This paper presents the numerical results of particle propagation in open space, taking into account the temperature of the human body and the surface of the ground. And also, the settling of particles or droplets under the action of gravitational force and transport in the open air is taken into account, taking into account the temperature during the process of breathing and sneezing or coughing. The temperature of the body and the surface of the ground, different rates of particle emission from the mouth, such as breathing and coughing or sneezing, are numerically investigated. The effect of temperature, cross-inlet wind, and the velocity of particle ejection from a person's mouth on social distancing is being investigated using a numerical calculation. The variable temperature of the human body forms a thermal plume, which affects the increase in the trajectory of the particle propagation, taking into account the lateral air flow. The thermal plume affects the particles in the breathing zone and spreads the particles over long distances in the direction of the airflow. The result of this work shows that in open space, taking into account the temperature of the body and the surface of the ground, a 2-m social distance may be insufficient for the process of sneezing and social distance must be observed depending on the breathing mode.

Did the Covid-19 restrictions influence land surface temperatures in Southeast Asia? A study from Ho Chi Minh City, Vietnam.

There have been a prolonged lockdown period and reduction in human activities in most of the major cities in the world during the Covid-19 pandemic period between the early 2020 and the late 2021. Such a reduction in human activities was believed to have influenced pollution levels and land surface temperatures (LST) in urban areas. This paper describes the variations in LSTs before, during and after the Covid-19 lockdown in Ho Chi Minh City in southern Vietnam, which is the economic hub of the country. For this purpose, Landsat-8 OLI and TIRS images acquired between 2015 and 2022 were used. It is observed that there was a significant reduction of 1 to 1.8 °C in LST in open areas, excepting impervious surfaces and built-up areas, during the strict lockdown period in Ho Chi Minh City, and an increase in LST since then. The observed reduction in LST during the lockdown period in Ho Chi Minh City is in agreement with the reduction in greenhouses gases during the same period in recent studies. Human mobility and industrial activities have been restored in November 2021 in the study area which would explain the regain in LST in the post-lockdown period.